PLANET <IPOE-E302>

PLANET

IPOE-E302

PoE Extender

алюминий

IP67

6 Гбит/с

Грозозащита до 8 кВ

Крепление к стене

ТАЙВАНЬ (КИТАЙ)

Store-and-Forward

2000 адресов

Поддерживается, до 9 Кб

60 Вт (макс)

97 Вт

150 x 72.94 x 43.8 мм

0.65 кг

24.07 x 18.86 x 8.94 см

0.643 кг

IEEE 802.3 Ethernet, IEEE 802.3u Fast Ethernet, IEEE 802.3ab Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.3af Power over Ethernet, IEEE 802.3at Power over Ethernet Plus, IEEE 802.3bt Power over Ethernet Plus Plus

IEEE 802.3x pause frame for full duplex, Back pressure for half duplex

Проводные роутеры (маршрутизаторы) и коммутаторы

IPOE-E302

IEC 60068-2-32 (Free fall), IEC 60068-2-27 (Shock), IEC 60068-2-6 (Vibration)

2K MAC address table with auto learning function

4.46Mpps @ 64Bytes

97 watts/331.6BTU (Full loading with PoE function)

удлинитель PoE

101879549116

Link/ACT LED x 3

IP67-rated and IK10 aluminum metal case

Temperature: -40 ~ 85 degrees C, Relative Humidity: 5 ~ 95% (non-condensing)

9Kbytes

PLANET

PoE in Port: 50~57V DC, max. 95 watts, 44~50V DC, max. 30 watts; Per PoE out Port: 48~56V DC, max. 30 watts

60 watts (max.) @ 802.3bt PoE++ input, 65 watts (max.) @ PoH input, 30 watts (max.) @ IEEE 802.3at PoE+ input, No support @ IEEE 802.3af PoE input

PLANET

FCC Part 15 Class A, CE

PLANET IPOE-E302 IP67-rated Industrial 1-Port 802.3bt PoE++ to 2-Port 802.3at PoE+ Extender (-40~75 degrees C, IK10 impact protection), 3 x waterproof cable glands included

101362617876

PoE in Port: 1 x 10/100/1000BASE-T Ethernet with 802.3bt PoE++ “Data + DC" in, auto MDI/MDI-X, auto-negotiation RJ45 connector; PoE out Port: 2 x 10/100/1000BASE-T Ethernet with IEEE 802.3af/at PoE “Data + DC" out, auto MDI/MDI-X, auto-negotiation RJ45 connector

Air 8KV DC, Contact 6KV DC

Store-and-Forward switch architecture

IPOE-E302 Промышленный РоЕ удлинитель 1-Порт 802.3bt PoE++ в 2-Порта 802.3at

0.65

1Mbit

PoE in Port: IEEE 802.3bt PoE++ Type 4 standard PD, PoH (Power over HDBASE-T), IEEE 802.3at PoE+ end-span/mid-span PD; Per PoE out Port: IEEE 802.3at PoE+ mid-span PSE

339g, 372g (with three waterproof cable glands)

IPOE-E302

150 x 43.8 x 72.94 mm (W x D x H), 169.85 x 43.8 x 72.94 mm (W x D x H), with cable gland

91088

0.1

6KV

Wall-mount ear

6Gbps

Temperature: -40 ~ 75 degrees C, Relative Humidity: 5 ~ 95% (non-condensing)

0.2

PoE in Port: 1/2(-), 3/6(+), 4/5(+), 7/8(-) or 1/2(+), 3/6(-), 4/5(+), 7/8(-); Per PoE out Port: 4/5(+), 7/8(-)

Physical Port Three 10/100/1000BASE-T Gigabit RJ45 ports - 1-port data + power input - 2-port data + power output Power over Ethernet 1-port data + power input - Complies with IEEE 802.3bt PoE++ Type 4 standard PD - Compatible with PoH (Power over HDBASE-T) protocol - Backward compatible with IEEE 802.3at PoE+ end-span or mid-span PD - Supports PoE input power up to 95 watts 2-port data + power output - Complies with IEEE 802.3at Power over Ethernet mid-span PSE - Up to 2 IEEE 802.3af/802.3at PoE devices powered - Supports total PoE budget up to 65 watts for 2 PoE output ports - Auto detects powered device (PD) Extends the range of PoE to an additional 100 meters (328ft.) Forwards both Ethernet data and PoE power to remote device Layer 2 Features Hardware-based 10/100Mbps, half / full duplex and 1000Mbps full duplex mode, flow control, auto-negotiation and auto MDI/MDI-X Features Store-and-Forward mode with wire-speed filtering and forwarding rates IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation Integrates address look-up engine, supporting 2K absolute MAC addresses 9K jumbo frame support in 1000Mbps duplex mode Automatic address learning and address aging Industrial Case and Installation IP67-rated aluminum case Wall-mount design Supports 6KV DC Ethernet ESD protection -40 to 75 degrees C operating temperature No external power cable required for installation Plug and Play installation